Trash Can Mold

Upload Your Design

120L Plastic Trash Can Mold

  • Mould Material: 718, P20
  • Runner System: Hot Runner
  • Mould Structure: Cylinder core pulling
  • Cycle Time: 60s
  • Injection Machine: 1600T
  • Ejection System: Ejection of stripper
  • Delivery Time: 65-75days

The kitchen and dining room of home are the primary use scenarios for kitchen trash cans.

White and grey are the most popular colours for kitchen trash cans because they are clean and neat.

We typically use high-quality PP material that is odourless, pollution-free, sturdy, and long-lasting.

There are two types of kitchen trash cans: pedal and wall-mounted, both of them generally have a lid, which can prevent the spread of odours.

The pedal type trash can, relying on the pedal to open the lid, freeing your hands; however, the pedal should be large, so that it is convenient for all types of shoes to step on; at the same time, design a thicker barrel body, so that the trash can is more stable and difficult to dump.

The wall-mounted type can be hung on the cabinet door to save space; the design close to the countertop allows garbage on the countertop to easily fall into the bucket and not be scattered on the ground; and, in addition to the kitchen, the wall-mounted design can meet the needs of many scenes in various locations.

Frequently Asked Questions

Pedal and wall-mounted.

Pedal: 6.5,10,15,20,30L.
Wall-mounted:8,12L.

High-quality PP.

White and gray, these two stylish colors look more clean and tidy.

Of course, each kitchen trash can is with a plastic liner, easy to replace the trash can.

It takes 50-60 days to make a mould.
It takes xxx s/minutes to produce a kitchen trash can with 20L capacity by injection molding.

First we receive the 3D drawing, then make the mould according to the drawing and debug for the production. After tested and qualified, the mould can put into production.

Take a 20L capacity kitchen trash can as an example, the injection machine of xx T is required.

    在这里添加您的标题文本

    Type of plastic dustbin

    Garden Trash Can

    The complete trash can mold consists of three parts, trash can mold cavity, trash can mold core, plastic trash can.

    Household Trash Can

    Household trash can are very common, not only to be lightweight, but also need to be affordable, so in the design of the product as much as possible to reduce the weight of the product, in order to better control production costs, as most families will use multiple household trash can, so the design also needs to be easy to stack and reduce transportation costs.

    Transport Trash Can

    Medical trash can are mainly used in hospitals and pharmacies, some medical supplies need to be thrown into the medical trash can after use, there will be a lot of bacteria and viruses in this kind of trash, which needs to be placed and handled separately.

    Kitchen Trash Can

    Kitchen trash can for home use need to be small and well-sealed, so that they can be used with trash can bags. Today some kitchen trash can with some infrared sensor function and voice sensor function, you can control the trash can open and close according to the gesture or voice.

    Park Trash Can

    Park trash can are mainly placed in the aisles of the park, the trash can are open on all sides, so that visitors can throw trash can when walking in the park.

    Medical Trash Can

    Medical trash can are mainly used in hospitals and pharmacies, some medical supplies need to be thrown into the medical trash can after use, there will be a lot of bacteria and viruses in this kind of trash, which needs to be placed and handled separately.

    Copyright © 2022. FOW Mould All Rights Reserved.
    Scroll to Top